What are the common STIHL MS 362 C-M problems? Difficulty in starting or not starting at all is the most common problem that one can think of. However, more than one reason can lead up to this inconvenience.
This lightweight but heavy-powered chain saw is built with modern technology, ensuring less engine trouble. If you’re having a hard time making your chain saw run, having a little knowledge of the reasons that cause the trouble might help you find the solutions a bit faster.
Let’s get to the point and find the reasons without any further ado!
STIHL MS 362 C-M Problems
So, what are the reasons that prevent your chainsaw from turning on? We’ll have a look at the most common reasons that are likely to cause such issues.
| Problems | Reasons |
| Dies after running for a short time | Bad crankshaft main bearings, wire caught in the clutch sprocket area. |
| Abruptly stopping | Dirty and clogged fuel tanks, pipes, or dirty carburetor. |
| Faulty carburetor | Jammed-up dirt, damaged wires, and levers. |
| Air leak problem | Clogged dirt or weak spring of the air valves. |
| Not starting at all | Worn out spark plugs and damaged wires. |
STIHL MS 362 C-M Dies After Running for a Short Time
Some users reported that the STIHL MS 362 C-M dies after running a short time, leaving their task incomplete and unsatisfied.
Although there can be many reasons behind this occurrence, the most common reason behind it is the faulty or damaged bearings of the crankshaft.
If the chainsaw gets tight after starting and eventually dies, it is more likely that something is caught in the clutch sprocket area. A small piece of wire can get wrapped around the rim and push it out.
Take off the muffler to check for internal problems and the clutch area. Clean out any alien object or debris which might be the reason for the issues.
Abruptly Stopping
STIHL MS 362 C-M needs an uninterrupted fuel supply for the cylinder to run smoothly. The cylinder gets the supply from the carburetor that generates the appropriate air-fuel mix. If your MS 362 is stopping abruptly, you should check what is hindering the air-fuel supply.
Debris, clogged dirt, or grease in the fuel tank and the pipes often restrict the air-fuel flow. As a result, the chain saw stops abruptly due to inadequate fuel supply. A dirty carburetor can also be the reason for fuel supply disruption.
Carefully cleaning out the fuel system often solves this problem.
Faulty Carburetor
A faulty carburetor can be the reason why your MS 362 is acting up.
The carburetor’s job is to take the fuel from the fuel tank and send it to the cylinder with a mix of air. If the carburetor fails to do its job, the fuel doesn’t reach the cylinder. Hence, the chain saw doesn’t start.
Jammed-up dirt can cease the carburetor’s ability to function properly. Damaged levers and worn-out wires are other possibilities that may create a much hassle.
Clean the carburetor to get rid of the dirt. You may need to replace the carburetor to bring out a better performance.
Besides, returning the carburetor sometimes works, especially when your chainsaw is running too rich. And most of the experts from Arborist Site agree with this. You need to check the user manual guide and turn the L and H screws a bit on the carburetor to make it work smoothly.
Air Leak Problems
Air leak problems can create minor or major issues depending on their source. It may lead to a compression problem which can prove to be fatal for the engine.
Take off the cover and check the air valves on top of the carburetor. See if the air valves are functioning properly. A weak spring or clogged dirt may restrict the valves from moving and doesn’t allow the air to pass. Evidently, the chain saw doesn’t start.
But the same air leak problem is found when troubleshooting the Stihl 500i chainsaw problems, and there the major reasons behind this are damaged o ring or water seal.
Repairing the air valves and getting rid of the grease will improve your STIHL MS 362 C-M. However, if it is an issue of compression, you’ll need the expertise of a professional.
Not Starting At All
Failing to start might be a sign of ignition system issues. The ignition system includes the crankshaft, ignition module, spark plugs, and connecting wires.
Worn-out spark plugs and damaged wires will cause a break in the ignition system resulting in the no start of the STIHL MS 362.
And the surprising fact is that this not starting problem is also one of the major Stihl MS 661 problems. You see, all of these chainsaws’ working procedures are pretty the same.
When you’re facing a problem with starting, thoroughly inspect the ignition system. It is always a good idea to take the help of an expert.
A Helpful Tutorial You May Need!
Frequently Asked Questions (FAQs)
Is a 362 a pro saw?
This lightweight but heavy-powered chain saw is built with modern technology that ensures less trouble for the engine. With the M-Tronic feature, the carburetor also adjusts automatically. This pro saw has the ability to satisfy its user.
Why does my STIHL chainsaw lose power?
There might be many reasons behind the STIHL chainsaw losing power. It can be caused by a damaged part, such as worn-out spark plugs, damaged wires, etc. Wire caught on the clutch sprocket is another possibility. Clogged dirt and debris in different parts may also create such trouble.
What would cause a STIHL chainsaw not to start?
A problem in the ignition system would cause a STIHL chainsaw not to start. A faulty carburetor, air leak problem, and damaged wires also prevent the chainsaw from starting.
Cut to the Chase
It is easier to deal with the STIHL MS 362 C-M problems when you understand what is causing that issue. And depending on the cause and its severity, you can determine the solution it needs.
The reason behind your STIHL MS 362 C-M not starting might be some stuck debris or a damaged part. A little cleaning can be your solution! Or maybe a part that needs to be replaced.
Whether you repair it yourself or depend on a mechanic, knowing the reason will allow you to give more attention to exactly what it needs.
If you find it hard to understand, you can always reach out to your dealer or the professionals near you!
You Can Also Read:
- Stihl MS170 Upgrades- Ultimate Solution for Your Chainsaw Problems
- Stihl MS391 Upgrades Step By Step
- Major Stihl 462 Problems You Need To Know
- What Are The Stihl Ms 291 Problems And How To Solve?
Was it helpful?
Enamored with the world of golf Jack pursued a degree in Golf Course Management at THE Ohio State University. This career path allowed him to work on some of the highest profile golf courses in the country! Due to the pandemic, Jack began Inside The Yard as a side hustle that quickly became his main hustle. Since starting the company, Jack has relocated to a homestead in Central Arkansas where he and his wife raise cattle and two little girls.