What are the common problems with Greenworks chainsaw? Are you passionate about knowing the major and minor issues of this chainsaw?
Different problems can arise in Greenworks chainsaw, such as stopping suddenly in cutting time, problems with the chain, and more.
When cutting a tree, these types of problems are common. To know in detail, continue your scrolling with full attention. Here we focus on Greenworks chainsaw problems with valid reasons and suggestions.
Greenworks Chainsaw Problems in Detail
When Greenworks chainsaw doesn’t start, in the meantime, it causes a matter of tension and falls into an unexpected problem.
After focusing on these major problems of Greenworks chainsaw along with other issue, it’s a matter of frustration. We will try to find the reasons with proper guidelines to get rid of these problems. Hopefully, it will be adequate to overcome these problems. Let’s start with this quick table guide.
| Problems | Reasons |
| The chain is not rotating, but the motor runs. | Damaged chain bar and chain, chain tension can be close-fitting and guide bar assembly issues. |
| A beep sound comes at starting position | Engage the chain, and the battery needs charging. |
| Chain & Bar can be hot and release smoke. | Empty chain oil tank and too tight chain. |
| While cutting, suddenly Chainsaw stops. | Overloaded Chainsaw. |
| The chain rotates, and the motor also runs, but not cutting | Backward working & dull chain. |
| Chainsaw gives a red warning light & beeps | Battery issue. |
After seeing the problem and reasons table, we get an overview of Greenworks chainsaw cutting problems. Now, we focus on these problems and reasons, collaborate with proper suggestions, and find chainsaw repair process.
Chain Not Rotating, But Motor Runs
This problem is the fundamental part of Greenworks 40V chainsaw troubleshooting. When the chain isn’t rotating but the motor runs, it bears some ominous signs. Let’s check the main reasons why the chain is not rotating.
- The chain tension becomes too tight.
- The chain guide bar is misaligned.
- Lost balance of guide bar and chain.
When these internal type issues arise, check the guide bar and chain, replace the Bar, and adjust chain tension manually. If you still have this problem, it can cause considerable damage.
A Beep Sound at Starting Position
While starting your chainsaw, you can hear a beep sound. It means the Greenworks Chainsaw has a problem and checks the reasons for this.
- Not engaging chain.
- The battery needs charging.
When these issues arise, you should recharge the battery and properly follow the charging instruction. Hopefully, it will be easy to overcome this problem within a short time.
Chain & Bar Can Be Hot With Smoking
After starting the cutting process, you can feel the chain and bar would be hotter and irrigate smoking. In that case, it will be a warning message to take the proper step as soon as possible.
- Too tight chain.
- Empty chain oil tank.
When these types of problems arise, you must make the chain tension lose, check the internal chain oil tank, and manually adjust the chain tension. Hopefully, you can easily overcome this problem.
While Cutting, Suddenly Chainsaw Stops
It’s a common problem when we start cutting procedures with chainsaw and continue working with the saw without giving it a break. Let’s check some factors of the chainsaw stopping issue.
- Overloaded chainsaw.
- Non-stop cutting without a break.
In that case, you should release the trigger of a circuit breaker and don’t force the chainsaw more. If you give a break, the chainsaw sometimes gets time to cut freely without extra stress.
Chain Rotates, Motor Runs, But Not Cutting
It’s also a common problem when using the Chainsaw to cut wood or tree. It can wreak havoc on Greenworks chainsaw’s chain and bar. So it would help if you were more careful about this problem. Let’s check the terms of it.
- The chain goes on backward.
- Dull & Heavy chain.
When this problem arises, you need to focus on removing rust from the chain and don’t give a chance to go the chain backward. Also, you may need to replace the chain in some cases. Hopefully, you can overcome this problem quickly.
Chainsaw Shows Red Warning Light & Beeps
Another problem you may face is that the chainsaw is showing a red light and giving a beep sound. And the most probable reason for such issues people find is either a dead battery or the battery needs charging.
Are Greenworks Chainsaws Any Good?
The Greenworks chainsaw can be the best option if you find an excellent battery-powered and electric chainsaw. You have a chance to select the right one according to your home voltage. So, it would be easy to charge without extra tension and adjust to all conditions.
So the Greenworks chainsaw is a more famous tool today to make your cutting journey easy and comfortable. If you already use Greenworks tools, it would be easy to stick to the same platform. So to size any wood or clean your house area, Greenworks Chainsaw bears excellent value from a cutting perspective.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
How Long Does A Greenworks Chainsaw Battery Last?
A Greenworks chainsaw battery lasts about 25 minutes with a 2.0 AH battery. While using the Greenworks chainsaw according to its approximate time, it holds plenty of oil to increase the sharpening ease of the saw. The battery duration is better than the other chainsaw.
How Do You Adjust A Greenworks Chainsaw?
At first, you need a side tensioning tool included with it. Then turn the screw right for high tension or left for low pressure, depending on your demand. At last, you should tighten the two bolts again. That is essential to lock the Bar in a particular position.
Are Greenworks Batteries Interchangeable?
Yes, the Greenworks batteries are interchangeable and can charge in different voltage forms according to your need. In that case, the optimal weights require using any from 2.0 or 2.5 AH batteries. But the Greenworks 80V chainsaw is different from the requirement.
Final Thought
Hopefully, you got a clear view of the Greenworks chainsaw problems with reasons and proper solutions. In cutting time, the Chainsaw stops suddenly, the motor runs, but the chain contains, a beep sound when attempting to start, etc. Are the most common ones.
In this context, we also focused on the major and minor problems, which will help you to identify the problem coherently. You even get an idea of how to overcome these problems.
If you are still confused, reread the content carefully, or you can get suggestions from an expert to increase knowledge on Greenworks chainsaws’ major and minor problems.
You Can Also Read:
- Stihl Weed Eater Won’t Stay Running? Troubleshooting Guide For You!
- Can you put an 18 inch bar on a Stihl Or Not Legit?
- Reasons Stihl Leaf Blower Not Running Full Speed & How to Troubleshoot
- How Do I Fix My Redmax Blower Problems?
Was it helpful?
If it has a motor Jason has a pretty good idea about how it works. Jason graduated in Automotive Mechanics Technology from Bishop State in 1992. After working on vehicles for 11 years he made the transition to selling tractors and lawn care vehicles. Currently, Jason writes and edits much of our content as he transitions into retirement with his lovely wife, Shelley.